iglide® GFI-0809-06 1/2" x 3/8" iglide G300 Polymer Flange Bearing

Tritan, UCFL205-16 (16mm BH), Flange Mount Bearing, 2 Bolt Flange, Set Screw Locking, Bore 25.4 mm Features: Standard duty unit, set screw locking Cast-iron housing Wide inner ring bearing Dual heavy-duty slinger type contact seals Anti-Rotation device Triple lip seals (R3 suffix) optional

Special properties of the igubal® rod end bearings: Maintenance-free dry operation High stiffening Very high fatigue strength in varying loads Compensation of misalignments Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight

Ideal for applications requiring strong load support in limited mounting area. Solid Zinc die cast housing is non-corrosive and lightweight. Securely retains bearing by pressing the lip 360 degrees over the outer race. Includes 2 set screws. Flange Mount Bearings are available with housing units made from die-cast zinc, pressed steel and pressed stainless steel. Die-cast zinc housings are non-corrosive and lightweight with either a bronze bearing or ball bearing insert. Pressed steel housings come plated with a rust-proof finish and are available with bronze bearing or ball bearing ...

USDA & FDA approved, for wash-down applications in wet or harsh environments or where sanitary conditions are a factor. Self-lubricating bearings resist corrosion, high impact and abrasion. Two-piece stainless steel housing units. Tolerates -60° to 180° F. Flange Mount Bearings are available with housing units made from die-cast zinc, pressed steel and pressed stainless steel. Die-cast zinc housings are non-corrosive and lightweight with either a bronze bearing or ball bearing insert. Pressed steel housings come plated with a rust-proof finish and are available with bronze ...

Special Features: The iglide® Clip2 bearing is a thin-walled bearing made from the iglide® M250 material and which has a beveled edge for extremely simple installations. The diagonal slit helps to compensate for poor housing bore tolerance as well as temperature and humidity changes. Split version of the iglide® M250 bearing Easy assembly by hand Compensation for heat expansion Suitable for ambient temperatures with high humidity Lightweight Very economical Inch and metric sizes available from stock Low bearing clearance, very accurate Maintenance-free and predictable service life