1/4 x 1-1/4 Mushroom Head Hammer Drive Anchor 18-8 Stainless Steel - Pkg of 100

Nail anchors are typically used in concrete, block, brick or stone for applications such as roof flashing, mechanical attachments, brick ties and masonry anchorage, furring strips, electrical fixtures, maintenance and more.

Hammer Drive Anchor - 1/4" x 1-1/4" - Mushroom Head - Steel - Zinc - Pkg of 100 - BBI 265020 Hammer Drive Anchors can be used in concrete, block, brick or stone. They are easily and quickly hammered into pre-drilled holes. The nail acts as an expansion and locking pin, and is relatively tamper-proof.

Nail Anchor - 1/4 x 1-1/2" - Mushroom Head - Zamac Alloy Body - Carbon Steel Nail - Pkg of 100 The Zamac Nailin is a nail drive anchor which has a body formed from Zamac alloy. The anchor can be used in concrete, block, brick or stone. A corrosion resistant Zamac alloy is used to form the anchor body with a mushroom head. The anchor can be used for light duty, tamperproof applications. The anchor is not recommend for overhead, life-safety or sustained tensile loading applications.

Stainless Steel Drop-In Anchors are manufactured with an internally threaded, all-stainless steel exterior shell that features an expansion cone insert used to anchor into the concrete. They are intended to be used in concrete materials only and can be used with any head style screw. The screw can easily be removed, loosened, or re-tightened if needed. Common applications include, pipe hanging, overhead anchoring, hanging strut, sprinkler systems and removable anchoring points. They are available in 18-8 stainless steel and can be manufactured to order in 316 stainless steel.

3/8X4 Flat Head Sleeve Anchor 18 8 Stainless Steel. Flat head screws are used when protrusion of the fastener above the mating surface is unacceptable. Typically 100 degree flat or for fastening softer materials, 82 degrees flat.