Maxline® 1" Pipe Clip, Pack of 10

Honeywell Thermopile 35 Inch Lead Push-In Clip, And With 1/2" -27 Split Nut 750 mV Thermopile with spade terminals connection and 35" leads. The Q313 thermopile generator contains multiple thermocouples connected in series to provide 750mV. The power generated is sufficient to operate an automatic millivolt gas control system, independent of any outside power source.

Use only with Maxline® 1/2 in. system only. The Maxline® 1/2 in. tubing , End Cap fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.

Use only with Maxline® 1 in. system. Maxline® compressed air tubing has an aluminum core sandwiched between an inner and outer layer of polyethylene. Tubing can be mounted on wall surfaces, in wall, or buried underground or concrete. Kit contains 100 ft. of tubing, cutter and deburr tool. On walls or underground use, Use with Maxline® 1 in. system. Features: Maxline® Semi-Flexible Compressed Air Tubing is a semi flexible tubing that uses compression fittings for leak proof performance. It is designed for efficient installation in diverse settings, from small shops and farms to large ...

Use with 1-1/2" Fastpipe® for flat surface with mounting screw on Ceiling or wall to mount. Features: Use with the Fastpipe® Rigid aluminum system Pack of ten Use pipe clips to secure pipe to any flat surface with mounting screw Clip has 5/16" thru hole and hex bore for a 5/16" hex nut Hex nut serves as a backer for screws Use #10 Drywall Screw or Tapcon In horizontal installations, mount clip pivot tab up

Use only with Maxline® 1 in. and 3/4 in. system only. The Maxline® 1 in. tubing x 1/2 in. x 1in. tubing, Reducing Drop Leg fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten. Features: Tubing on all three sides 1"(A) x 3/4"(C) x 1"(A)