Milton 1144-1 20 Micron Filter Element Sintered Bronze For use with mini filters

This 1" NPT heavy duty micro filter is supplied with pre-assembled automatic overnight drain 3 stage baffle system and porous bronze 40 micron filter element. Micro filters remove harmful water or oil condensate pipe scale dirt and rust from compressed air systems. The corrosion resistant metal bowl has a capacity of 29 ounces and is protected by a safety metal bowl guard. Maximum of 250 PSI and 300 SCFM.

This 3/4" filter housing is made from high impact chemical resistant plastic and is engineered to function with no vibration noise. The ribbed steel reinforcing plate gives a positive seal with the filter and the base is welded steel protected with epoxy coating. 3 tube silencer.

Arrow connector inserts are designed to guide the insert to an interlocking position on the unit body. This design provides a unique safety feature, should the insert plates be removed while the system is under pressure, the interlocking slide will prevent blowing away.

Monitor filter elements and change them before they lose efficiency and effectiveness. Clogged filter elements reduce the flow rate through the air preparation unit and fail to remove particulates. Stocking and replacing filter elements - a low cost, simple maintenance task that can pay large dividends in filter performance and pressure drop. CEJN can offer four different types of filter elements that can provide clean air for most industrial applications. Check with an authorized CEJN distributor for availability and prices. Other connections and sealing material on request. Some part ...

This unique 3/8" diverter for Arrow standard series components permits a portion of filtered air to be branched before entering the regulator and sends it to another location; or when installed after the regulator, it will divert a portion of regulated air. The diverter can also be used when pressure drop readings are required.