17C-A-3-25 Thermostatic Trap

Features: Designed to be installed directly on the water heater hot port. Dual purpose mixing or diverting valve. Constant water temperature under different operating conditions. Proportional valve (control of hot and cold water). Flow reduction in seconds if cold water supply is interrupted. Temperature adjustable using 3/16 in. Allen® wrench (included). Union coupled tailpiece connections included. Heat trapping not required. Recirculation connection for fast response. Integral check valve on cold water port. Bronze/stainless construction. Teflon® coated wear surfaces to prevent lime ...

Watts 1-1/2" Steam Trap 0037107 This float and thermostatic steam trap, 1 1/2" with .500 orifice, is used in steam main drips and process applications to provide continuous air venting and condensate removal. It features an iron body H-pattern design, stainless steel valve head, seat, float and thermostatic air vent. It is water hammer resistant and can be serviced without disturbing system piping and it is ideal for use in unit heaters, heat exchangers/reboilers, air heating coils, steam main drips, and process equipment. Operating pressure is 15 PSI.

FT075C-6 F&T Trap 1-1/2 In For large high capacity units. Resistant to water hammer and corrosion. Below condensate level seat design prevents steam leakage. Rugged stainless steel thermostatic element eliminates air binding. Stainless steel internal components. Can be serviced without dismantling piping.

B0150S-2 Bucket Trap 1/2 In The Series B0 Inverted Bucket Traps are designed for a wide range of industrial applications including unit heaters, laundry and process equipment and steam line drip traps. These cast iron inverted bucket traps operate efficiently for long periods of time to add solid energy savings by lowering replacement and labor costs. They are fully repairable for even bigger maintenance savings.

FT125C-5 F&T Trap 1-1/4 In For large high capacity units. Resistant to water hammer and corrosion. Below condensate level seat design prevents steam leakage. Rugged stainless steel thermostatic element eliminates air binding. Stainless steel internal components. Can be serviced without dismantling piping.