Fantech 18" Roof Ventilator Direct Drive Downblast 5DDD18EB, 3/4 HP, 115/230V, 1 PH, 4030 CFM, ODP

Belt-drive upblast ventilators are designed for roof mounted exhaust of commercial and industrial buildings. There models are both for roof and wall application (except 5BDU30 and 5BDU36). Durable spun aluminum construction with steel support braces. Backward inclined aluminum fan wheel. Motor and wheel are easily detachable without removing ventilator from curb. Permanently lubricated ball bearings (5BDU10 - 5BDU13) and regreasable pillow block bearings (5BDU15 - 5BDU24). Features: All ventilators are listed UL 705 for electrical and UL 762 for restaurantexhaust in USA only Models 5DBU10 ...

Roof mounted belt drive downblast ventilators are designed to exhaust air out of commercial and industrial buildings. These models are for roof mounting only. Motor and wheel are easily detachable without removing ventilator from curb. Permanently lubricated ball bearings (5BDD10 - 5BDD13) and regreasable pillow block bearings (5BDD15 - 5BDD24). Features: All ventilators are UL 705 Standard listed Durable spun aluminum construction with steel support braces Inlet temperatures up to 170°F Backward inclined aluminum fan wheel Equipped with a built-in bird screen to protect discharge ...

Direct-drive upblast ventilators are designed for continuous operation to exhaust foul air, smoke, fumes, odors and grease-laden vapors from range hoods and commercial cooking appliances. Ventilators are designed for installation in industrial, institutional and commercial kitchen applications. All models are equipped with a backward inclined aluminum fan wheel and a speed controllable motor. Features: All ventilators are listed UL 705 Inlet temperatures up to 170°F Backward inclined aluminum fan wheel Externally cooled motor compartment Fully welded windband

Ideal for exhausting air from factories, offices, warehouses or commercial buildings. The ALX series spun aluminum exhaust fan can be used as either a roof top or wall mount exhaust fan. Features: Spun aluminum housing will not rust, chip or peel. Aluminum backward inclined wheel is non-overloading. All motors are 1 Phase 120/240V operation and can be operated at 50 or 60 Hz. All units can be wall mounted. Variable speed PSC Motors available on ALX105/120/135. Quick release latches for easy motor access on ALX135 – ALX165. Comes with bird screen.

The RE/REC Series of direct drive centrifugal fans provide an excellent solution for residential or commercial ventilation applications where the fan must be mounted on the exterior of the building. Two base styles are available: RE models with a flat base for direct flashing to the roof or REC models with flanged base for curb mounting. RE models can also be mounted on an exterior wall when roof access is not suitable. Features: 100% speed controllable Suitable for airstream temperatures of up to 140° F Excellent heat dissipation for long motor life Built-in thermal overload ...