Tri-Arc 20" Deep Top Step Kit, Perforated

U-Design 5 step Supported Cantilever ladder with 20" of cantilever platform length with perforated tread supported by bottom frame assembly. The ladder is designed with a comfortable 50 degree stairway incline with 24" wide perforated steps. Powder coated yellow finish.

U-Design 15 step steel rolling ladder with a 39" overall width, 24" wide perforated tread step, and 10" deep top platform. 42"H handrails. The ladder is rated at 450 pounds and is powder coated gray. Can be configured with U-Design kits including All-Directional kit, 20" or 30" Deep Top Platform kit and Stock Picking Shelves kit (sold separately). Note: Cal-OSHA Kit model 952412 must be ordered at time of purchase if shipping to the state of California in order to be OSHA compliant.

9-Step forward descent U-Design configurable ladder with perforated tread, 24" wide steps, 17" deep top platform. The 50-degree incline permits forward descent on comfortable and spacious 8-1/2" deep steps. Add U-Design kits to the base ladder model to enhance features and application use (sold separately). Kits can be added at any time. Note: Cal-OSHA Kit model 606697 must be ordered at time of purchase if shipping to the state of California in order to be OSHA compliant.

U-Design Crossover 3 step ladder on a 50 degree stairway incline with 24" wide perforated steps. Can be used on either side of the Crossover and be paired with any other 3 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.

U-Design Crossover 6 step ladder on a 90 degree stairway incline with 24" wide perforated steps. Can be used on either side of the Crossover and be paired with any other 6 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.