Tri-Arc 30" Deep Top Step Kit, Grip Strut

U-Design Crossover 20" Bridge Span with 24" wide grip strut tread. Includes guardrails and toe board. Combine with additional 20" spans or 30" spans to create the desired crossover span distance. Up to 3 span combinations of any size does not require an additional leg kit for support. Powder coated yellow finish. Click the Specifications button to the right to access the U-Design Configurator, which provides a simple step-by-step selection process to configure your ladder. Must be purchased with ladder units, turn platforms, and/or leg kits as required.

14-step forward descent U-Design configurable ladder with grip Strut tread, 24" wide steps, and 17" deep top platform. The 50-degree incline permits forward descent on comfortable and spacious 8-1/2" deep steps. Add U-Design kits to the base ladder model to enhance features and application use (sold separately). Kits can be added at any time. Note: Cal-OSHA Kit model 952412 must be ordered at time of purchase if shipping to the state of California in order to be OSHA compliant.

U-Design 6 step steel rolling ladder with 24" wide grip strut tread and 10" deep top platform. 42"H handrails. The ladder is rated at 450 pounds and is powder coated gray. Can be configured with U-Design kits including All-Directional kit, 20" or 30" Deep Top Platform kit and Stock Picking Shelves kit. Note: Cal-OSHA Kit model 606697 must be ordered at time of purchase if shipping to the state of California in order to be OSHA compliant.

U-Design Crossover 6 step ladder on a 75 degree stairway incline with 24" wide grip strut steps. Can be used on either side of the Crossover and be paired with any other 6 step ladder regardless of the incline. Powder coated yellow finish. Click the Specifications button below to access the U-Design Configurator which provides a simple step-by-step selection process to configure your ladder. Must be purchased with leg kits, crossover bridges, and/or turn platforms as required.

U-Design 6 step Unsupported Cantilever ladder with 30" of cantilever platform length with grip strut tread. The cantilevered platform is counterweighted allowing the cantilever platform to extend into the work area with no obstructions on the bottom of the ladder. The ladder is designed with a comfortable 50 degree stairway incline with 24" wide grip strut steps. The ladder can be configured as a Supported Cantilever ladder by removing the counterweight and adding the 20" U-Design Extension Bottom Kit. Powder coated yellow finish.