Milwaukee® 48-20-7497 Tapcon® 7Pc. Installation Kit, SDS-PLUS

Bosch SDS-Max Rotary Hammer Bit, HC5030, 3/4" Diameter, 13" Long Features Centric tip guides bit through hard and reinforced concrete Angled dust channels reduce heat build-up resulting in longer life Inclined side cutters have an aggressive edge for faster cutting Wear mark identifies when bit has worn to an inappropriate level for precision anchor

Milwaukee Sds Bit Assortment 48-20-7490 Milwaukee's 44 Magnum™ series carbide drilling bits offers a unique multi-faceted carbide insert reducing the breakage possibility when drilling through re-bar and mesh. The distinctive chisel shaped tip breaks concrete quickly for faster penetration. The four fluted spiral shaft has improved dust removal resulting in less bending stresses. Available in diameters from 5/32 inch to 5/8 inch. Assortment of five bits. Assortment SDS shank Carbide Assorted lengths

SDS-max Standard Tip Fits all SDS-max rotary hammers and Hilti TE F, G and Y rotary hammers Patented flute geometry removes dust from the hole quicker for fast drilling and long life Shot-peened, double-tempered finish reduces breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications Chrome vanadium shaft through-hardened to 50-53HrC

SDS-plus Standard Tip Fits all SDS-plus and Hilti TE-C rotary hammers Reduced area above the flute prevents the drill bit from binding while drilling-the full usable length can be utilized Chrome vanadium shaft through-hardened to 50-53HrC Patented tip and flute design removes dust more efficiently - up to 25% faster than other bits Shot-peened, double-tempered finish reduces breakage Hot isostatically pressed to extend life and resist breakage Copper braze material gives high heat resistance for reduced tip loss All tips made to ANSI specifications

Specifically designed for use with all SDS+ high impact rotary hammers. Special 3-flute design reduces jamming and tip breakage. Monobloc, 135°, carbide tip point allows for faster penetration. Conforms to ANSI spec B212.15-1994. The solution for drilling rebar and concrete without cracking. This drill has a right hand direction of rotation. This drill has a shank length of 2".