PeakWorks® 5' Choker Sling Anchorage Connector, 2 D-Rings

This 4 ft residential anchor sling is efficient and portable, featuring a reinforced loop on one end and a regular loop on the other end. Anchor slings are used to hold winches and pulleys to an anchor, giving you piece of mind when a temporary anchor is required. The anchor sling is a versatile and reusable anchor point made with a durable, abrasion-resistant webbing and built with a minimum tensile strength of 5,000 lb. These anchor slings can be connected to a wide variety of materials such as steel, wood and concrete and effectively meet or exceed CSA and ANSI standards. Pair this ...

Features: Detachable sliding safety device that attaches to a vertical fixed rail for fall arrest protection Weighs 3.25 lbs. Made of CNC-machined aluminum with stainless steel pins, Zytel™ roller bearings, stainless steel spring, and stainless steel bolts Fits a 1/2" x 2" stainless steel rail or T-shaped aluminum 1/4" x 2" rail Swivel snap hook is permanently attached to the D-ring on the Climb-Rite® device Complies to OSHA 1910.27(d) & 1926.1053 for ladder safety devices Complies to ANSI A14.3 (1992) fixed ladder safety standard

Features: Permanent anchor - 5/8" (16mm) hole A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector Anchors can be connected to a variety of materials such as steel, wood and concrete The anchor should be located directly above the worker to prevent swinging The height of an anchor is a key variable when determining fall clearance As with all fall protection products, anchors must be inspected by a competent person at a minimum annually All PeakWorks® anchors are built with a minimum tensile strength of 5,000 lb. (22 ...

Features: Permanent anchor - 1/2" (13mm) hole A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector Anchors can be connected to a variety of materials such as steel, wood and concrete The anchor should be located directly above the worker to prevent swinging The height of an anchor is a key variable when determining fall clearance As with all fall protection products, anchors must be inspected by a competent person at a minimum annually All PeakWorks® anchors are built with a minimum tensile strength of 5,000 lb. (22 ...

The PeakWorks® Fall Protection Tank Trolley™ is designed for use on water and fuel storage tanks. The Tank Trolley™ provides a 5,000 lbs. anchorage as required by OSHA and ANSI standards. The Tank Trolley simply rides on the top lip of the storage tank and can be used with a standard lanyard or self-retracting lifeline. Features: Standards compliance: Materials Meets OSHA 1926.5 subpart M, 1910.66 app. C, ANSI A10.14, Z359.1 Trolley: Rollers 1/4" steel, powder coated finish with forged steel O-ring attachment polyurethane composite material Capacity: Application 310 lb. designed ...