Rapidair 50200, 1/2" Tee Fitting

Rapidair outlet kit to be used with 1/2 in. OD x 3/8 in. ID Rapidair nylon tubing. Use for wall or ceiling mount applications. Block is ported on the back side for rear entry also. Includes moisture drain.

3/8" Push on Hose Fitting x 1/4" Female Swivel NPT Features: Brass fitting PSI rating: 200

Set up a compressed air system with the 1/2 in. Rapidair Master Kit with 2 air outlet locations. Single layer nylon tubing can be mounted on wall surfaces or in wall. Reduce shop clutter with this easy to install compressed air piping system. No glue, soldering or crimping needed. Simply cut the tubing to length and insert in the fitting. Tubing can be removed from the fitting with a push of the outer button. Easy to expand with more air outlet locations or modify later.

Use only with Rapidair® Home Garage 1/2 in. OD x 3/8 in. ID nylon tubing system. The Rapidair® 1/2 in. tubing x 1/2 in. tubing Union fitting, features a push to connect style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length and insert the tubing into the fitting. Tubing can be released by push button if desired.

The Maxline 3/4 in. tubing x 3/4 in. tubing, Elbow fitting, features a compression fitting style to make fast and easy connections. There is no glue, soldering or crimping needed. Simply cut the tubing to length, insert in the fitting and tighten.