51.6-ND-43-27-M5 Retaining Magnet Assembly Disc-Shape, 2 Int. Threads, Rubber Shell, 1.69" Dia Steel

Ideal for applications with limited space. Locking patch available upon request. Features Plunger body, pin and pull ring: Stainless steel, European Standard No. 1.4305

A low cost choice for light duty applications. Maximum heat resistance of nylon plastic: 194° F (90° C).

Threaded plugs can be used as a spring retention unit as shown above or as a plug to keep debris from entering into a critical threaded area.

J.W. Winco 62-AN-39 U-Shaped Magnet w/ Thru Hole - .98" Thickness, Steel GN 62 magnets have a split magnetic surface. These are non-shielded magnetic systems produced by casting. To ensure that the magnetic forces are not impaired, the mounting screws must be made of non-magnetic material. For easier handling and/or to avoid demagnetization, these magnets have an iron plate on their magnetic surface. Type AN magnet temperature resistant to 535 °F (280°C), Red lacquered finish temperature resistant to 355 °F (180°C).

Indexing Plunger - Lock-Out Type Black Oxide Steel 3/8-24 Thread Indexing plungers with lock-out position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. The head of the plunger body is provided with a suitable notch in opposite positions so as to prevent the plunger from accidentally slipping back into its forward position. Maximum heat resistance of nylon plastic hand knob: 110°C (230°F).