J.W. Winco 51.7-ND-31-B Retaining Magnet Assembly w/ Key Ring w/ Rubber Jacket, 1.22" Dia, Steel

GN 54.1 magnets are a shielded magnetic assembly. The configuration of magnetic and iron poles is known as a sandwich magnet assembly. These retaining magnets provide superior holding power and work well with smaller workpieces. Mounting options include pressing in or gluing resistant to 175 °F (80°C).

GN 50.2 magnets are a shielded magnetic assembly. Temperature resistant to 390°F (200°C).

JW Winco - 22KE52 - Safety Clutch Assembly w/Needle Bearing - 41mm Dia x 22mm Bore & Keyway The use of needle bearings and the hardened bearing surfaces make the clutch engagement extremely easy.This is also assisted by the finer teeth of the clutch and the increased length of the coupling attachment. Its suitability for high shaft speeds, especially when these are maintained for long periods, is a further advantage of the needle bearing. An oil-hole is provided in the clutch mechanism to accept lubrication. In the completely assembled safety clutch handwheel, there is a lubrication ...

GN 53.1 magnets are a shielded magnetic assembly. They are primarily used for holding drawings and the like. The magnetic material is characterized by a high adhesive force. Temperature resistant to 175 °F (80°C).

GN 251.6 Setting Bolts are a shielded magnetic assembly. One example use for these setting bolts is as workpiece stop, with the magnet holding the workpiece in place. The included locking nut can be used to secure the setting bolt after positioning