Milton 643 1/4" FNPT Hex Coupling Hose Fitting

3/8" Air hose swivel connector offers a 360 degree swivel in two directions which allows air hose to be connected to air tool to reduce hose kinking and keeps the hose out of the way. These are not for use with percussion tools without the use of a hose whip or snubber hose. Allows for better flexibility and less hose kinking. Maximum inlet pressure of 150 pounds per square inch Controlled air flow up to 40 standard cubic feet per minute Built in gauge 1/4" Female national pipe thread

Milton 600 1/4" MNPT 1/4" ID Hose End Fitting 1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. 1/4" hose inside diameter 1/4" Male national pipe thread Features a barb type construction that provides a secure grip on the hose inside diameter

Milton 642 3/8" ID Hose Mender Fitting These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have hose barbs. 3/8" hose inside diameter For best results and professional finished product the hose end should be secured with a crimped ferrule Features a barb type construction that provides a secure grip on the hose ...

1/4" air hose swivel connector with flow control gauge. The 360 degree swivel moves in two directions which allows air hose to be connected to air tool and reduce hose kinking and keeps the hose out of the way. These are not for use with percussion tools without the use of a hose whip or snubber hose. Allows for better flexibility and less hose kinking. 360 degree swivel allows air hose to be connected to air tool to reduce hose kinking and keep the hose out of the way. These are not for use with percussion tools without the use of a hose whip or snubber hose Allows for better flexibility ...

Milton 640 1/4" ID Hose Mender Fitting 1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have 1/4" hose ID and hose barbs. Assemble new hoses or replace old fittings 1/4" hose inside diameter Features a barb type construction that provides a secure grip on the hose inside diameter