80/20® 40 Series 2 Way - Light Squared Corner Connector

The 3 way - squared corner connector is an external fastening method that is typically used to create a corner connection between three profiles. It is a heavy-duty connection that is simple to use and provides a polished look. The 3 way - squared corner connector requires an end tap machining service on the mating profiles.

The 2 hole - pivot joint is an external fastening method that is lightweight yet sturdy. This connector can either mount to the end of a profile, which would require an end tap, or the slot tabs can be removed for mounting directly to the T-slot without any required machining services. The screws on the arms can be adjusted for movement or fixed in one position. The suggested hardware for the 2 hole - pivot joint can be found on the "Suggested Hardware" tab.

The HJ-1NP is a metal anti-static connector set that allows you to connect two 28mm pipes in a T-shape or to create a corner. This connector is the most easily assembled and the most commonly used in the entire Flexpipe system. You can rotate this connector up to 360 degrees before fixing it to make 45- or 90-degree supports for surfaces or just for supporting your products. The HJ-1NP is so versatile that you can build whole custom structures with just this connector and some pipes. Applications for this connector are numerous, from corners to separations, pegs, 45-degree supports, and ...