80/20® 45 Series Threaded Plate, Clear, Bright Zinc Finish

The slide-in economy T-nut with centered thread is a cost-effective fastening option available with options in size, material, thread, and finish. It loads from the profile ends and has a pilot thread projection that adds additional threading for increased strength. The centered thread of the slide-in economy T-nut lends itself to connections towards the middle of a profile or with a flat plate. Tip: Position the pilot projection down in the T-slot to avoid an uneven connection or crashing.

The pressure manifold access plate is commonly used when adding a pressurized substance to a T-slot profile. It has a tapped hole, mounts to the profile side, and includes an attached O-ring to provide a tight seal where the pressurized substance is released. The maximum allowable pressure is 150 psi (1034.21 kPa). The suggested mounting hardware is included.

80/20 3287 Slide-In Triple Economy T-Nut Features: Reduces assembly time Loads from the profile end only Made from steel with bright and black zinc finishes Perfect for multiple hole joining plates

80/20 3275 Slide-In Economy T-Nut Features: Loads from the profile end only Available in stainless steel or carbon steel,black or bright zinc-plated Threaded Pilot Projection Threaded pilot projection provides more thread, adding strength to the fastener Position the projection down in the T-slot to avoidcrashing and an uneven connection

The slide-in economy T-nut with centered thread is a cost-effective fastening option available with options in size, material, thread, and finish. It loads from the profile ends and has a pilot thread projection that adds additional threading for increased strength. The centered thread of the slide-in economy T-nut lends itself to connections towards the middle of a profile or with a flat plate. This T-nut is available in a double or triple configuration. Tip: Position the pilot projection down in the T-slot to avoid an uneven connection or crashing.