80/20® Cross Hinge Joint Set Steel Cr

The HJ-13NP is a chrome-plated joint set with antistatic properties (ESD) generally used to reinforce the structure's capacity. To assemble an HJ-13NP you need to put two H-13NP together with an M6-25BWZ bolt and an M6-NWZ nut. Assembly tip: This joint set is frequently used for the assembly of workstation, rack or cart requiring a high load capacity. To make an HJ-13NP, you need to assemble two H-13NP with one M6-25BWZ bolt and one M6-NWZ nut.

Great solution for Parallel and Double Piping! Generally used to reinforce the load bearing capacity of structures, the HJ-21 can also be used as a thrust bearing on a flow rack or rack Just like the popular HJ-13 format, our Double Tee Join Set HJ-21 takes it to the next level. Instead of using two HJ-1s for your parallel or double piping needs, the HJ-21 offers a stronger, faster and less expensive assembly process.

The HJ-24 is a metal connector set that creates a three-pipe intersection on two axes. This connector is the best option when you need to create separations without damaging the structural rigidity of some pipes. The hinge bracket AP-HINGE allows the connector to be swivel. To create an HJ-24, you need to regroup two H-24 together with two M6-25B bolts and two M6-N nuts using one AP-HINGE. The HJ-24 will be used mainly in the center of exterior sides. This connector will give you the option of making a pipe grid with fewer tubes than would be required with a wire mesh, which is made with ...