80/20® Flex pipe Standard Joints with 4 Pre-Drilled Holes, Chrome Plating, Box of 150

The 2 hole - pivot joint is an external fastening method that is lightweight yet sturdy. This connector can either mount to the end of a profile, which would require an end tap, or the insert tabs can be removed for mounting directly to the T-slot without any required machining services. The insert tabs include both an M8 and M10 size. The screws on the arms can be adjusted for movement or fixed in one position. The suggested hardware for the 2 hole - pivot joint can be found on the "Suggested Hardware" tab.

The H-4 is a metal single joint needed to create joint sets known as HJ-3 and HJ-4. This joint is mostly used to create joints that work best in the center of structures. Since this metal piece is part of the HJ-3, which is a critical connector. This part will not be used as much as the three first Hs. The H-4 was built with six internal striations for optimal grip on the pipe's outer coating. This connector was also pre-drilled with three holes for the reinforcement of heavy-duty structures. The product comes in a nickel-plated version called H-4NP. This version will be necessary when ...

Features: Compatible with 28mm pipes Using two H-13NP creates the HJ-13NP joint set Chrome-plated with antistatic properties (ESD)

The H-13 is a metal single joint that lets you create a HJ-13 joint set. This connector is necessary for the reinforcing of Flexpipe structures. Group two H-13 together to obtain the joint set. This single joint is one of the crucial components of the Flexpipe system. This is partially why the H-13 has an ESD version called H-13NP.

The single long UniBearing™ has an open design that enables customized layouts. It is an option that is commonly used in applications with one guiderail. The UniBearing™ is easy to quickly install or remove without taking it apart, allowing reduced retooling and downtime and increased productivity and flexibility. The pads are mounted using stainless steel flathead socket cap screws that secure it to the housing and eliminate the need for high-cycle pads. The bearing can move or be fixed; when fixed, it allows the guardrail and assembly to move. All UniBearings™ come with ...