Anchor kit for Approach Plate for Edge Of Dock Levelers

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard ramping is 29-13/16 inches, with a thirty-six (36-5/8) inch long ramping length available for smaller grade. A steel dock edge, or approach ramp is required for proper installation. The mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down ...

Easy energy savings with the insulated Leveler Blanket™. Dock Levelers are energy hogs at your loading dock. Energy can be lost through the side gaps, the bottom door seal or by heat transfer through the dock leveler plate. Energy loss at your loading dock is a major drag on chillers, heating systems, and maintaining dock temperature for food safety. Lastly, energy loss has a negative impact on your operational expenses. The Leveler Blanket's simple design makes it convenient to place and lay on your leveler, so energy savings is easy when your door is not in use. Whether you use the ...

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard ramping is 29-13/16 inches. A steel dock edge, or approach ramp is required for proper installation. The mechanical Edge-O-Dock is operated by placing the actuation handle into the pocket of the inner lip and pulling down toward the floor. The operator then pushes the handle forward until the lip rests ...

The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. It comes complete with bumpers and installation instructions. Standard ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inch long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and ...

DLM MECHANICAL EDGE OF DOCK LEVELER Attaches easily to the steel nosing of an existing dock, saving valuable dock loading space; no concrete work or pit necessary. 5" upward and 5" downward working range. A full 15" lip projects 12" beyond bumper. High strength 3/8" steel safety plate and heavy-duty hinges. Automatically releases and returns to stored position when truck exits. Supplied with two 12" x 14" molded rubber bumpers and reinforced mounting blocks. Counter-balanced extension spring lift ensures one person, one hand operation. Includes 41"L Steel Hook to facilitate opening of ...