Extech BT100 Battery Capacity Tester, AC Milliohmmeter, Datalogger, Test Leads, Clips,(6)AAA battery

13 Function Wireless True RMS MultiMeter/Insulation Tester. MultiMeter/1000V Insulation Tester with Wireless PC interface (915MHz). Measure Insulation Resistance to 20GΩ 5 Test Voltage ranges Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR) Low Resistance measurement with Zero function Programmable Timer feature sets the duration of test Comparison Mode allows user to set the Pass/Fail values for insulation measurements Step Voltage (10% steps at 50% to 120% of range) Auto-discharge of voltage test signal Lock Power On Function for hands-free operation Manually ...

Extech PRT200 Non-Contact Phase Sequence Tester. 75to 1000VAC (45-65Hz) The Extech PRT200 Checks phase sequence and phase status. It tests from 75 to 1000VAC (45-65Hz) with LED and audible indication. LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live. A beeper sounds intermittently when correct phase is detected and continuously if phase is reversed. Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement. LED brightness is adjustable. Includes fully insulated alligator clips with wide jaws.

The Gardner Bender Digital Battery Tester allows you to quickly determine the existing charge in your battery. No more guessing if the battery is good or not. Tests all common batteries to determine if they are charged or need replacement. The tester provides an easy color coded readout. Easily and quickly determine existing charge; Moveable contact arm fits multiple battery sizes: AA, AAA, C, D, N, 9V, 1.5V button cells; LCD readout with three-color scale: green is full, yellow is low, and red is dead; Requires one (1) 1.5V button cell battery (not included)

The DVA30 is the only two-in-one current/voltage detector designed for electrical testing. It detects AC voltage from 12 V to 600 V and AC current from 200 mA at 0.2 In. distance and at much greater distances for larger current flow up to 1000 A. sensitivity adjustments increase or reduce sensor trigger threshold. Audible and visual indicators show the presence of current or voltage. It can be used to trace concealed wires in walls and floors, identify hot wires, trace current flow where voltage detection does not work (behind walls, in conduits, through concrete, or underground). The ...

Datalogs up to 100,000 readings of TRMS AC voltage (600 V) or current (200 A) with a user programmable sample rate from 1 second to 24 hours. LCD displays time/date, current reading, min/max and if the user settable high/low alarms have been exceeded. Readings can be downloaded to your PC via the USB interface. Normal, peak and capture (user specified trigger level) recording modes. Features: Current clamp Test leads Alligator clips Software USB cable 110 V AC adapter 3.6V lithium battery