Omni Metalcraft 48"W Chain Driven Live Roller Conveyor, 10'L, 2250lb Cap., 30 FPM, 208-230/460V

Omni Metalcraft Lineshaft 3' Drive Conveyor LSDS1.9X16-22-3-3-F60-0.75-CD - 1.9" Dia. 22"BF, 3/4 HP Lineshaft Driven Live Roller Conveyors are a unique concept in powered conveyors.The basic design employs rollers which are independently driven by a urethane belt from a common drive shaft. The general operation of the conveyor is a driveshaft that runs the full length of the conveyor and transmits power to the rollers via a drive spool and belt. When back pressure is applied to the conveyed product, the spools driving the rollers under the product will slip on the driveshaft allowing the ...

Standard specifications include: BED - 6-5/8" deep x 12 ga. formed steel Slider Bed is powder coat painted. Reinforced with 3/4" pipe which forms sockets for guard rails. BELT - Ultimate 140BBS - Nitrile Belt END DRIVE - Located on discharge end of conveyor, chain guard on left hand side. DRIVE PULLEY - 8" dia. with 1-3/16" dia. shaft at bearings, machine crowned and fully lagged. TAIL PULLEY - 6" dia. with 1-3/16" dia. shaft at bearings, machine crowned. SNUB IDLER - Adjustable 2-1/8" dia. for tail end; 2-1/2" dia. for drive end. Pre-lubricated ball bearings. Guards included. RETURN ...

Chain Driven Live Roller Conveyor CDLR1.9X9-36-4-10-F30-0.5 is 10' Long, 36" Effective Width, 1.9" Dia. x 9 Ga. Steel Rollers on 4" centers. Rollers High on Idler Side, Conveyor speed up to 30 Feet Per Minute, 1/2 HP, 208-230/460 VAC - 3 Phase. Drive mounted side high, (3) Supports for 36" Top of Roller Features: Top of Roller Height: 36" +/- 3" Capacity Lbs. Per Roller: 203 Capacity Lbs. Per Foot: 406

Omni Metalcraft REPLACEMENT CONVEYOR SKATE WHEEL Replace worn or broken conveyor skate wheels with these factory replacements. 1-15/16" diameter black nylon wheel offers 50 lbs. capacity per wheel.

The Model CDLR16F chain driven live roller conveyor is constructed of an 8 ga steel channel frame and 2-1/2"x11 ga steel rollers on 5" centers. Each roller is positively driven. Each drive is powered by a 1 HP motor and operates at 30 FPM. Non-drive slave units can be added to provide a desired overall length. Capacity is affected by the total length of the system. Generally a drive will support slaves up to a total length of 50' with a maximum live load of 7,000 Lbs. At 30' the maximum live load is 15,000 Lbs. The per foot maximum live load is 800 Lbs. using supports on 5' centers. The ...