Urrea J200G 4 Piece Plier Set (Long Nose, Slip Joint, Diagonal, Tongue & Groove)

Features: Long, Tapered Nose - Offering extra reach into tight spaces, the long nose tapers from a wide base to a fine tip. To make sure the tip can consistently grasp the tiniest wires or parts, the base of the jaws is relieved with a small gap (0.3 mm +/- 0.1 mm) to prevent contact that would keep the tips from closing tightly together Fine Crosscut Teeth - Oriented at 120 degrees to each other-60 degrees to each side of the jaw centerline-the serrations are cut in two passes to form fine, regularly-spaced, diamond-shaped teeth. Unlike single serrations cut straight across the jaw, this ...

The Beta 1009L/D extra-long nose pliers have a double joint for minimal hand movement and are ideal for handling small parts and getting into tight locations. They are great for use on O-rings, small fuses, and other small parts. These extra-long knurled nose pliers feature slip-proof, double layer PVC coated handles. These pliers measure 342mm (13-7/16") in overall length with 71mm (2-13/16") long jaws.

Features: Insulated for Electrical Work - The handles are insulated to protect against electrical shock for voltages up to 1000 V AC and 1500 V DC. They are individually tested and VDE certified in accordance with IEC 60900 Long, Slim Jaws for More Access - The slim jaws are 3.2 inches long from the center of the joint to the end of the tips, allowing you to reach into tight spaces. Five Work Zones Wire Cutter for fast, clean cuts Serrated Surface for controlled gripping Smooth Surface for non-marring clamping Coarse Teeth for an aggressive bite Hex-Grip Teeth for turning hex bolts Hex ...

The Gearwrench® Pitbull line of pliers is Gearwrench®'s most advanced range of industrial pliers. The Pitbull line of pliers offers the industrial/automotive technician the best grip and cut day in and day out. They are forged from alloy steel and precision machined for long life and durability. The Pitbull pliers offer unique features such as the K9 Jaws which provide a strong grip, even when on a 35° angle, and a high leverage joint design which provides up to 35% greater cutting power. This product has a limited lifetime warranty. Features: K9™ jaw design for a strong grip, ...

These sturdy snap ring pliers are designed to squeeze internal snap rings (circlips) from 40mm to 100mm (1-9/16" to 4") ID. The heavy duty jaws taper down to 3/32" (2.3mm) diameter pins and are angled to work with the plier handles perpendicular to the shaft. These 1034L pliers have extra-long jaws and handles for long reach areas. Brushed chrome finish with orange PVC-coated handles.