J.W. Winco DIN466 Knurled Nuts, M3 x .5, 6"(.24)

DIN 508 t-slot nuts are made from heat-treated steel, feature a blackened finish, and are a property class 10.

DIN 464-NI knurled thumb screws are manufactured from solid bar stock.

Clamp nuts GN 206 are simple and economic components. These are preferred when a painted finish is required.

The mini indexing plungers feature small, compact dimensions. These are designed for installation in thin walled sheet metal applications. The plungers are inserted into position by holding them by the knurled knob. The wrench flats on the lock nut are exposed when the pin is retracted, so that the plunger can be easily tightened by means of an open end wrench.

GN 506 T-slot nuts can be rolled into position, they can be inserted at any point along the slot. The guide step positions the nut parallel and central within the slot, which makes it easier to move the nut and prevents from twisting during tightening. The spring loaded ball prevents an unwanted movement of the nut in the slot which is highly desirable on a bed with the T-slots in a vertical position.