Werner® Friction Bolt Anchor

The Werner A311000 EVO Anchor is a 5K removable anchor that utilizes the Remote Grab System (RGS). The RGS allows the user to install the EVO Anchor before leaving the safety of the ground. The RGS can also be used to remove the anchor from the ground after the job is done. The EVO Anchor requires a pre-installed receptacle that is cast-in-place during construction of the surface.

The Werner A510022 10K Mega-Swivel with Straight Loop Insert Bolt attaches to the Werner A510021 Straight Loop Insert that was cast-in place during construction of the surface. The Mega-Swivel is made of steel and plated for corrosion resistance. Includes 5/8-inch bolt and lock washer. The Mega-Swivel design allows full range of motion.

The Werner A525400 Post Anchor features fastening holes and is made of corrosion-resistant galvanized steel construction. The 16-inch x 16-inch x 3/8-inch base plate provides secure and permanent installation for wood and concrete applications.

The Werner A515000 Reusable Anchor with 2-inch swiveling forged teardrop D-ring is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 3/4-inch and 3-1/2-inch minimum depth in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design. This features a blue trigger and hole plug for easier removal.

The Werner A510001 10K Mega-Swivel Steel Anchor is a robust anchorage bolt for use in concrete applications. The bolt requires a pre-drilled hole of 3/4-inch with a 5-inch depth into 3000 psi concrete with a minimum thickness of 7 inches. The D-ring swivel provides a full range of motion at the anchorage.