Hoffman Specialty® FT015C-8 Steam Trap 404240, 2" 15 Psi

B&G Hydronic BPX brazed plate heat exchangers for residential/light commercial applications offer a unique mounting system and the highest level of thermal efficiency and durability in a compact, low cost unit. The unique integral mounting tabes and connection locations allow for easy installation to any hydronic heating panel without the need or cost of a separate mounting bracket. 1" NPT Connection Type. 5-5/8"W x 2-3/8"D x 12-1/4"H.

420C Strainer 1 Inch Npt Y Strainers are designed for steam, oil or water lines. Strainers should be installed ahead of temperature regulating and/or pressure reducing valves and steam traps to protect their moving parts from dirt, this is particularly important for new installations.

Watts 1-1/2" Steam Trap 0037107 This float and thermostatic steam trap, 1 1/2" with .500 orifice, is used in steam main drips and process applications to provide continuous air venting and condensate removal. It features an iron body H-pattern design, stainless steel valve head, seat, float and thermostatic air vent. It is water hammer resistant and can be serviced without disturbing system piping and it is ideal for use in unit heaters, heat exchangers/reboilers, air heating coils, steam main drips, and process equipment. Operating pressure is 15 PSI.

B0150S-2 Bucket Trap 1/2 In The Series B0 Inverted Bucket Traps are designed for a wide range of industrial applications including unit heaters, laundry and process equipment and steam line drip traps. These cast iron inverted bucket traps operate efficiently for long periods of time to add solid energy savings by lowering replacement and labor costs. They are fully repairable for even bigger maintenance savings.

Watts 1-1/4" Steam Trap 0037111 This float and thermostatic steam trap, 1 1/4" with .228 orifice, is used in steam main drips and process applications to provide continuous air venting and condensate removal. It features an iron body H-pattern design, stainless steel valve head, seat, float and thermostatic air vent. It is water hammer resistant and can be serviced without disturbing system piping and it is ideal for use in unit heaters, heat exchangers/reboilers, air heating coils, steam main drips, and process equipment. Operating pressure is 30 PSI.