Crosby G-414 Galvanized Thimble Extra Heavy 3/8" Wire

Advantage Standard Duty Steel Zinc Plated Wire Rope Thimble 3/8" Diameter Method of Application: Turn back specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope. Apply the next clip as near the logo as possible. Turn on the nuts but do not tighten. Space additional clips equally between the first two. Take up rope slack. Tighten all nuts evenly on all clips. Additional quantities can be made to order, Must call to place order for different quantity.

carbon anchor shackle G-213 round pin hot dip galvanized forged-quenched & tempered with alloy pins can be used in tie down, towing, suspension or lifting applications

Forged - Quenched and Tempered, with alloy pin Working Load Limit permanently shown on shackle Hot-dip galvanized Fatigue rated Satisfies ASME B30.26 requirements Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)

Used for flemish eye wire rope splicing Designed for low temperature toughness Resists cracking when swaged (equals or exceeds stainless steel sleeves) Special processed low carbon steel Can be stamped after swaging for identification purposes (view product specifications for full details) Recommended for use with 6x19 or 6x37, IPS, XIP or XXIP, RRL, FC or IWRC wire rope

Eliminates the potential breaking off of the tail due to fatigue…tail is secured by base of clip and the wedge, left unharmed and available for reuse Eliminates the need for an extra piece of wire rope Dead end of wire rope is secured to wedge, which eliminates loss or "punch out" of the wedge Basket is cast steel and magnetic particle inspected Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets 80% efficiency rating based on catalog strength of XXIP wire rope QUIC-CHECK markings are incorporated…the wire rope should pass ...