ReadyTrace™ Ground Fault Circuit Interrupter Outlet Adapter For Outdoor Use

Adapter hose easily connects to tabletop patio heaters to convert from 1 lb. disposable propane use to full 20 lb. propane tank. Helps patio heater last 20 times longer and provides an economical solution to reduce refills and disposing tanks. Measures 5L with hose connection ends.

Pipe Mounting Kit (PMK) 12" Frame-Particularly useful in buildings with insufficient structural strength to use other types of mounts. Requires 3" (76 mm) pipe (3½" / 89 mm O.D.) (not supplied). Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure that is to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs (136 kg). Not suitable for models - HP 30, FR 30, HP 36, FR 36, or Tandem AH Series (24B fan configuration). Although Ruffneck™ Unit Heaters are designed to ...

Improve heat distribution from your Dyna-Glo wall heater with Dyna-Glo's Vent Free Wall Heater Fan. Operate on manual mode if you'd like your fan always ON. Operate on AUTO MODE if you'd like your fan to operate ONLY when it will blow warm/hot air. This Dyna-Glo Vent Free Wall Heater Fan fits all Dyna-Glo vent free wall heater's 10,000 BTU's and above. This unit requires a 120V grounded outlet.

Solaira™ Omnis 90 Amp variable phase angle control, multi-Voltage 120 or 208/240 volt, up to 90A total load. Includes Nema 1 Vented enclosure and low voltage Potentiometer included. For variable control of single heater load with optional inputs including 0-10dCV, 4-20mA, Building Management systems including Lutron, Crestron, Control 4 and others. Optional Timer, Occupancy Sensor, thermostat. It is Made up Of Circuit Board Material.

Basic Mounting Kit (BMK) 20" Frame - The BMK is suitable for applications where the support arm can be bolted or welded directly to structural steel or concrete. Mounting kits are made of steel with wet-applied enamel paint. If the heater is installed on a structure that is to be transported, provide additional support for the heater during transit. The suspended weight should not exceed 300 lbs (136 kg). Not suitable for models - HP 30, FR 30, HP 36, FR 36, or Tandem AH Series (24B fan configuration) Although Ruffneck™ Unit Heaters are designed to be installed in an upright and ...