Bel-Art H18805-0000 Poxygrid Labware Drain Stand, 16-3/4"L x 6-1/2"W x 19"H, 14 Supports & 12 Pins

This unique stand holds up to 94 pipettes and rotates on a central vertical axis for convenient selection. Rotating disks are 18cm (7⅛") diameter. Instructions for quick assembly included. Lower disc consists of four concentric troughs with tapered sides and open bottoms which cradle the tips protectively Upper rotating disc has a grid pattern concentric with the bottom disc keeping the pipettes vertical Liquid draining off the pipette tip is retained on top of the stationary base by the outer rim Low center of gravity stabilizes the 48cm high (18³⁄₄") stand on the 23cm (9") diameter base

Made for measuring sand and other settled matter in water and sewage, these Imhoff cones are molded of glass-clear, unbreakable styrene acrylonitrile. Use a Poxygrid®cone rack to support three or four Imhoff settling cones in a single row for clearer viewing. Cones have continuous graduations up to 1000ml and are ideal for tests where a high volume of settled matter is present Leakproof polyethylene plug permits easy withdrawal of sediment for gravimetric analysis and simplifies cleaning Cones graduated in these divisions: 0-2ml in 0.1ml, 2-10ml in 0.5ml, 10-40ml in 1ml, 40-100ml in 2ml, ...

Holds large conical and round-bottom centrifuge tubes that cannot stand up by themselves (such as Falcon®, Corning®, Nunc®, and Kimble®). Epoxy-coated steel wire rack is 10.2cm (4") high; has two levels of square grids to hold 6 tubes up to 250ml (60mm diameter) Heat-cured epoxy coating is unaffected by organic solvents, salts, weak acids and weak alkalis Temperature range: -223°C (-369°F) to 121°C (250°F); autoclavable

The Cleanware™ Pipette Rinsing System for pipette cleaning and storage has an effective, reliable design that ensures safe, efficient operation. Available in a complete system or in individual components. Pipette Rinsers provides a simple, automatic method for rinsing large numbers of pipettes at one time High level water entry provides an air gap between the maximum water level and the end of the water inlet tube ensuring safe and efficient operation "Tube within a tube" siphoning system assures rapid, complete and automatic siphoning and refilling over a wide range of inlet water ...

Lab-Aire®II Electric Drying Racks accelerate drying of labware with warm, circulating air while their compact footprint uses minimal benchtop space. 230V models are CE marked. 400 watts of drying power gently circulates heated air into and around items to decrease drying time Efficiency is enhanced with a replaceable foam filter that keeps warmed air dust free Heat selector knob allows choice of three temperature settings: high, medium and low Power button illuminates when in use, and an 8-amp @ 120V (4-amp @ 230V) circuit breaker and independent thermo-fuse protects unit from overheating ...