Honeywell Mercury Free Heat Only Thermostat For Single Stage Low Voltage Heating Systems T822K1000

J&D's VC012-C is pre-wired with a 120 Volt, 8' piggyback cord. Simply plug the thermostat into a grounded outlet, then plug your exhaust fan, circulation fan, or power shutter into the back of the thermostat plug for instant operation. No electrician required. Made in the USA. Features: UL Listed File#: E357053 Differential: 2.4°F (1.3°C) Enclosure: Rugged UL50 Type 2 Size: 4-1/2" x 6-3/4" x 2-1/2" Coiled, stainless steel sensor provides rapid response to temperature change Use for heating or cooling

Non-Programmable Thermostat 24V Heat Only This thermostat is designed to support indoor temperature control for residential, office, and other related environments. The adjustable design allows you to easily raise the climate with the push of a button. The electrical connection recommends adding a 1A fuse in the line circuit for added protection. Be sure to disconnect the power supply prior to accessing or replacing the batteries. Includes two mounting holes and wall anchors for easy installation and a low-battery indicator. White color finish.

Thermostat, Heat Only, Line Voltage, Double Pole, With Off Position This thermostat gives you easily accessible temperature control for residential, office, hospitality, and other indoor environments. The adjustable turn dial is designed to regulate climate conditions for maximum comfort. The unit must be installed in a grounded metal or plastic wall junction box for safety. Installation should be performed by a qualified electrician. Do not expose the thermostat to hot surfaces, sunlight, or moisture. ETL listed. White color finish.

XTE-411 Defender® Thermostat Ruffneck™ Defender® XT-411 is engineered for use in the most demanding applications such as drilling rigs, utilidors, and compression stations where dirt, fluctuating power, and high-impact conditions exist. It is considered the most robust and trouble-free thermostat in the market due to its solid construction. The Ruffneck™ Defender® XT-411 thermostat is for heating only and is suitable for ventilation systems in demanding industrial applications. It is designed for use in hazardous locations where specific explosive gases or dusts are present. The ...

J&D's rugged VC012 thermostat is perfect for applications that require a simple control. It may be wired for heating or cooling to control your exhaust fan, circulation fan, power shutter, heater, or heat lamp. Made in the USA. Features: UL Listed File#: E357053 Differential: 2.4°F (1.3°C) Enclosure: Rugged UL50 Type 2 Size: 4-1/2" x 6-3/4" x 2-1/2" Coiled, stainless steel sensor provides rapid response to temperature change Use for heating or cooling