Liberty Pumps HT450 Manual High Temperature Sump Pump, 1/2 HP, 115V, 10' Cord, 180F

Column style sump pump for sumps minimum 11" in diameter and maximum 24" deep Features: 8' cord length Available in corrosion resistant thermoplastic (EPP models) or heavy duty cast iron (EPC models) Continuous duty, efficient 115V PSC (permanent split capacitor) motor for lower carbon footprint; higher efficiency using less energy to operate Top mounted adjustable vertical float switch for easy accessibility and adjustment 1-1/2" FNPT discharge EPP series handles 3/16" solids and EPC series pumps handles 3/8" solids

Features: Top suction, durable, cast iron 1/2 HP primary pump with vertical float switch for automatic operation High flow, corrosion-resistant, battery back-up pump with reliable reed float switch with battery box and charger (2) Heavy-duty check valves Pre-assembled and preset for quick installation. Simple drop-in installation! Designed for 15 in. diameter or larger sump basins 120 VOLT PRIMARY PUMP (CDU800): 1/2 HP; max. flow rate is 4200 Gallons Per Hour; 3150 GPH at 10 ft. of discharge lift. Approximate on level @ 9 in. - off level @ 4 in. 12 VOLT BACK-UP PUMP (ESP25): Back-up pump ...

Zoeller BN140 Flow-mate for septic tank - low pressure pipe (LPP) and enhanced flow step systems. Effluent or dewatering submersible pump with 1-1/2" NPT discharge. Passes 1/2" spherical solids. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles. Single piggyback switch included. BN models include a variable level float switch and 1½" X 2" PVC adapter fitting - 20 ft. UL Listed Neoprene cord with molded plug cap and ground wire - Durable Cast Iron construction - Stainless Steel lifting handle - ...

The K2® 1/2 HP Submersible Sump Pump is designed for home sump applications. Constructed with a stainless steel pump housing, cast iron volute and cast iron seal plate, this pump is built to last. The pump includes a direct-in vertical float switch for reliable and maintenance-free operation and fits into a minimum 10 inch diameter sump basin or larger. Features: Top suction design minimizes clogging, filters debris and handles up to 1/4 inch solids. Lubricated upper and lower ball bearings Heavy-duty energy-efficient, oil-filled PSC motor provides continuous lubrication and extends the ...

Flotec Easy Sump™ Pre-Plumbed 1/2 HP Sump Pump The "Easy Sump" comes to you pre-plumbed and ready to install in your sump pit. Includes 24" PVC pipe, pre-plumbed with universal check valve for use with either 1-1/4" or 1-1/2" pipe. Pre-Plumbed for easy installation Features: Three easy steps saves time and money Versatile design - Replaces pedestal or submersible pump Thermoplastic construction Resists corrosion Zinc motor housing Dissipates heat quickly and extends motor life Stainless steel fasteners and hardware Superior quality Smooth Flow Hydraulics Deliver high performance for ...