Tie Down Engineering Alsipercha Inverted L Fall Arrest Overhead 14'3" x 8'2", Steel, 310lbs Capacity

The Werner LITEFIT™ H312001 Standard Harness with Back D-Ring provides the right harness, the right fit, and the right value. In the event of a fall arrest, simply pull the patented Relief Handles to achieve the Gravity Override position, to help reduce the potential hazards of suspension trauma. The design allows for 5-point adjustments for optimal fit, lightweight hardware and bright colors for worker visibility on the jobsite. Rear dorsal D-ring is made from high quality alloy steel for strength and durability, and has an adjustable pad for worker convenience and fit. Slotted ...

Guardian® 125 ft. Cable Climbing System, 2-User, Galvanized Steel (includes brackets, cable assembly and hardware) Extension Bracket Included The Guardian® Cable Climbing System is an innovative Personal Fall Arrest System (PFAS) designed for fixed ladders or other vertical height safety applications. It offers easy installation and a patent-pending shock absorber for superior arrest force mitigation in the event of a fall. Robust, adjustable mounting clamps reduce needed hardware by up to 25% for quicker, simpler installation while lowering the risk of dropped objects at height. The ...

3M™ DBI-SALA® 8518386 Davit Arm Assembly 23.5-42.5", 450 Cap Lbs8518386 Variable offset davits are designed for use where multiple offset masts are required. The variable offset masts may be equipped with front mounted and/or back mounted winches or SRLs and feature an anchor point rated up to 5,000 lbs. (22kN) depending on pin position. For applications with overhead clearance restrictions, the adjustable height of the variable offset masts can eliminate the need for custom length masts and mast extensions. Quick connect/release pins allow for fast and easy set-up, dismantle and ...

Features: Permanent anchor - 5/8" (16mm) hole A complete fall arrest system requires three primary components: approved full body harness, connector and anchorage connector Anchors can be connected to a variety of materials such as steel, wood and concrete The anchor should be located directly above the worker to prevent swinging The height of an anchor is a key variable when determining fall clearance As with all fall protection products, anchors must be inspected by a competent person at a minimum annually All PeakWorks® anchors are built with a minimum tensile strength of 5,000 lb. (22 ...

The Werner LITEFIT™ H311001 Standard Harness with Back D-Ring provides the right harness, the right fit, and the right value. In the event of a fall arrest, simply pull the patented Relief Handles to achieve the Gravity Override position, to help reduce the potential hazards of suspension trauma. The design allows for 5-point adjustments for optimal fit, lightweight hardware and bright colors for worker visibility on the jobsite. Rear dorsal D-ring is made from high quality alloy steel for strength and durability, and has an adjustable pad for worker convenience and fit. Slotted ...