Midtronics IR Printer W/Charge For Micro 500, 700, ES1000 Units - A087

This load tester will perform variable load testing on 12 volt batteries rated as high as 1000 cold cranking amps. Use this battery tester to simulate actual cranking loads. Also tests alternator charging voltage and relative starter current draw. This features large dual meters to display the battery voltage and load current simultaneously, during the test.

NOCO Genius Boost eyelet cable with X-Connect adapter features a heavy-duty mountable eyelet design for automotive and powersport applications. Mount the eyelets to the battery for quick access to both charging and jump starting. Remove the adapter from the eyelets to connect directly to either the GB20, GB30, or GB40 Boost models, or connect the adapter to the eyelets to allow for plug-n-play with NOCO Genius Chargers. The eyelets were designed to efficiently transfer maximum current flow with minimal power loss, and the silicone insulation is suited for both heat stability and ...

The GCP1 is an AC Port Plug with an integrated extension cord that offers optimal flexibility and ease of installation. It works with any extension cord and requires no cable modifications or hand wiring. Its sleek, ultra low-profile design not only works seamlessly on any application but includes a pressure-fit cap for a watertight seal. And it makes a charging port, engine block, or garage outlet more accessible than ever before - endless possibilities. Rated at 13-amps, 125-volts for peak performance Integrated charge inlet with a 16-inch extension cable Requires no cable modification ...

Designed with the highest quality and versatility in mind. Interprets data from the charging/starting system on easy-to-read LED display voltmeter and ammeter. Also shows +/- Amps for easy diagnosis of current leakage problems. The 500 Amp carbon pile variable load capability provides accurate load testing for up to 1000 CCA batteries. Circuits protected against reverse voltages due to incorrect hookup. "LOAD ON' light indicates the load is activated. Spring loaded to shut-off automatically. MADE IN USA.

Lightweight hand-held digital battery tester with USB port for print to PC. Stores last test series with or without power. For testing all 12V automotive starting batteries rated in CCA, DIN, IEC, JIS# and EN. Also for testing vehicle's Electrical System. A carrying case and cables are included with printer.