Durham Mfg.® Keystock Rod Rack, 12-9/32" x 6-3/16" x 11-1/8"

The double sided horizontal bar rack is ideal for use in maintenance departments, tool rooms, machine shops, and storage areas. Arms extend and act as dividers creating bays of storage. Arm levels can store material up to ten (10) feet long. Aligning two (2) units next to each other will allow for the storage of longer material. Bar rack has pre drilled lag down points that make installation quick and easy. Features: Two sided arms provide additional storage capacity Slightly bent up arms prevent material roll off Solid steel construction provides long lasting rugged use

This Little Giant® heavy duty wire reel transporter features a large capacity 1" diameter bar stock secured with set screws, and will accept reels up to 32" in diameter and 21" wide. The smaller 5/8" rods will accept reels up to 12" in diameter and has 21" of usable width. This cart was uniquely designed to be easy to load. Tilting the cart forward to align the rod with the center of your spool will allow you to roll these oversized spools into position without having to lift the large, heavy reels. Features: 10" Solid Rubber Wheels All-welded construction

All-welded Electrician's Cart carries everything you need for a wiring project. Supplied with five 36" long spool holder rods for numerous wire reel configurations. Heavy 12 gauge steel shelves have a 1-1/2" lip to retain small parts. Top shelf 24" wide x 36" long x 35" high. Bottom shelf measures 24" wide x 48", providing a 12" extension for upright storage and transport of conduit or other long material. Hanger bar on side of cart for convenient ladder storage. Casters are 5" polyurethane, 2 swivel with total-lock wheel brakes and 2 rigid. Overall length is 54". Durable powder coated ...

Mobile Wire Reel Cart is ideal for transporting your spools of wire and other materials from job to job. Four 16" wide rods with 7 available positions hold multiple wire reel configurations. Solid bottom shelf allows additional storage. Rolls smoothly on 5" non-marking polyurethane wheels. 2 rigid and 2 swivel casters with total lock brakes secure the unit in place and keep it from "walking" while in use. Open back allows unrestricted access to storage on the 18" x 32" deck.

600 lbs. Overall Capacity, 150 lbs. Capacity per Spindle All-welded Wire Reel Caddy has four 16" wide rods for holding multiple wheel configurations. Wheels are off the ground while standing so it does not "walk" while pulling wire. Center divide allows for easy unloading and loading on 1 reel at a time. Features: Full-width handle Convenient tool tray Heavy-duty angle iron frame 8" x 2-1/2" solid rubber wheels Powder coated gray finish