Crosby Link Weldless Ring 1" X 4", 10800 LBS WLL S

Suitable for use with both Grade 80 and Grade 100 chain Individually proof-tested at 2-1/2 times Working Load Limit with certification Locking system that provides for simple assembly and disassembly...no special tools needed 25% stronger than Grade 80 Meets ASTM A-952-96 standards for Grade 100 chain fittings Forged alloy steel, Quenched and Tempered Fatigue rated

carbon anchor shackle S-209 screw pin self-colored forged-quenched & tempered with alloy pins can be used in tie down, towing, suspension or lifting applications

Used to reinforce eyes of cable assemblies to reduce abrasion. Method of Application: Turn back specified amount of rope from the thimble. Apply the first clip one base width from the dead end of the wire rope. Apply the next clip as near the logo as possible. Turn on the nuts but do not tighten. Space additional clips equally between the first two. Take up rope slack. Tighten all nuts evenly on all clips.

Forged - Quenched and Tempered, with alloy bolt Working Load Limit permanently shown on shackle Hot-dip galvanized Fatigue rated Satisfies ASME B30.26 requirements Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)

Forged - Quenched and Tempered, with alloy bolt Working Load Limit permanently shown on shackle Hot-dip galvanized Fatigue rated Satisfies ASME B30.26 requirements Can be furnished proof-tested with certificates (additional charges apply, inquire at time of order)