Little Giant 506125 6-CIA Submersible Sump Pump - 25'L Cord

Little Giant® Submersible Sump Pump 6-CIM-R, 115V, 46 GPM At 5', 10' Cord Typical applications include commercial, industrial, and home uses where liquid must be transferred or re-circulated. Features: 1/3 HP shaded pole motor with overload protection Designed for continuous duty Epoxy coated cast iron housing 1-1/4" (31.7 MM) adapter and 3/4" (19 MM) garden hose adapter available Carbon/ceramic shaft seal Upper and lower sintered sleeve bearings

Little Giant® 6EN Series Sump Pump - 10' Power Cord Little Giant 6EN Series pumps feature 1/3 HP Permanent Split Capacitor (PSC) motors providing lower current draw, energy efficiency, improved performance and cooler-running for durability. Built on the industry's best 6E platform, the 1/3 hp 6EN series consumes only 6.0 amps while producing 50 gpm @ 5 ft. of head and reaching a maximum shut off of 22 ft. The new unit also includes a stainless steel plate on the volute as a debris filter, creating lower intake velocities and pump stability. Features 1/3 HP Permanent Split Capacitor (PSC) ...

Zoeller BN140 Flow-mate for septic tank - low pressure pipe (LPP) and enhanced flow step systems. Effluent or dewatering submersible pump with 1-1/2" NPT discharge. Passes 1/2" spherical solids. The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles. Single piggyback switch included. BN models include a variable level float switch and 1½" X 2" PVC adapter fitting - 20 ft. UL Listed Neoprene cord with molded plug cap and ground wire - Durable Cast Iron construction - Stainless Steel lifting handle - ...

Heavy duty cast iron construction for strength & durability Features: Available in wide angle (requires 18" minimum diameter wide sump basin) or vertical (for sumps less than 11" in diameter) automatic on/off switches Continuous duty, efficient 115V PSC (permanent split capacitor) motor for lower carbon footprint; higher efficiency using less energy to operate 8' power cord on ECD30/33/50 and 10' power cord on ECD75 Submersible for quiet operation 1-1/2" FNPT discharge (ECD75 2" FNPT discharge, includes 2" MNPT x 1-1/2" FNPT adapter) Non-clogging vortex, thermoplastic impeller passes 1/2" ...

Zoeller M3098 automatic high temperature submersible pump for use in dewatering applications up to 200 degrees. Conduit length is 3 feet (0.9 m) - Power cord length is 15 feet - High temperature liquid-tight conduit used with high temperature cable - High temperature motor windings - High temperature Viton® gaskets - High temperature thermal overload protected - All control components in contact with water are high temperature rated - Float operated mechanical switch box which is mounted on the discharge pipe above the operating level (switch box is not intended to come in continuous ...