Kukko Long Hydraulic Spindle For The 20-2+, 20-20+, 30-2+ & 30-20+ Series, 11 Ton Capacity

Made in Germany, Reversible jaws can be used for both external and internal applications, Combination puller can be used as a 2-jaw or 3-jaw puller depending on your application. The 3-arm lug puller with combi traverse has oscillating and reversible puller legs and is used for centric pulling off of bearings, gears and washers in all common sizes for handicraft, workshop and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The swivelling puller legs with adjustable clamping width can be used on both sides. The claw shape ...

Made in Germany, Adjusted reach to provide larger depth range, Two jaw design for space-saving applications. The heavy, 2-armed lug puller with oscillating and height-adjustable puller legs is used for centric pulling off of large bearings, gear wheels and discs in all common sizes for handicraft, workshop and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The oscillating puller legs adapt to any installation situation and can be used universally due to the possibility of adjusting the clamping depth. The claw shape differs ...

Made in Germany, Reversible jaws can be used for both external and internal applications, Adjusted reach to provide larger depth range, Two jaw design for space-saving applications. The 2-arm "Cobra" separating puller with adjustable clamping depth and lateral clamping clamp is used to pull off flat bearings, gear rims and washers in all common sizes for crafts, workshops and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The puller legs can be rotated 180° and can be used on both sides. One side has normal pull-off ...

For removing bearings, gears, discs, etc. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Standard pulling hook. Automatic self-centering pulling hooks. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip). Mechanical pressure screw. Milled thread treated with special coating. The pulling hooks sliding parts must always sit ...

For removing bearings, gears, discs, etc. for tight or difficult-to-access spaces. The thin pulling hooks are suitable for narrow, difficult-to-access locations. A manual adjustment knurl allows rapid loosening and adjusting of the extractor jaws on the cross-beam without using a wrench. Can be installed on various pulling hooks and variable reach thanks to jaw extensions. Suitable for pulling asymmetric workpieces. Spindle head band prevents the wrench from slipping off. Cross-beam with hexagonal profile for good grip. Almost all components available as replacement parts, time-saving ...