Proto J229-01G 5-9/16" Spring Loaded Long Nose Plier W/ Side Cutter

Features: Long, Tapered Nose - Offering extra reach into tight spaces, the long nose tapers from a wide base to a fine tip. To make sure the tip can consistently grasp the tiniest wires or parts, the base of the jaws is relieved with a small gap (0.3 mm +/- 0.1 mm) to prevent contact that would keep the tips from closing tightly together Fine Crosscut Teeth - Oriented at 120 degrees to each other-60 degrees to each side of the jaw centerline-the serrations are cut in two passes to form fine, regularly-spaced, diamond-shaped teeth. Unlike single serrations cut straight across the jaw, this ...

The Beta 1009L/D extra-long nose pliers have a double joint for minimal hand movement and are ideal for handling small parts and getting into tight locations. They are great for use on O-rings, small fuses, and other small parts. These extra-long knurled nose pliers feature slip-proof, double layer PVC coated handles. These pliers measure 342mm (13-7/16") in overall length with 71mm (2-13/16") long jaws.

The Beta 1009L/B extra-long nose pliers have a 45° bent nose are ideal for handling small parts and getting into tight locations. They are great for use on O-rings, small fuses, and other small parts. These extra-long knurled nose pliers feature slip-proof, double layer PVC coated handles. These pliers measure 273mm (10 3/4") in overall length with 73mm (2.87") long jaws.

Features: Crosscut Teeth - Oriented at 120 degrees to each other, the serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth Grip in All Directions - Unlike straight serrations where the grip strength varies relative to tooth direction, a crosscut pattern grips evenly in any direction Range of Tooth Types - Smaller pliers with fine teeth are best for smaller precision applications and result in less marring of the workpiece. Larger pliers with more aggressive teeth provide a stronger grip on less delicate parts Stout, Strong Build - These stout, strong pliers ...

These sturdy snap ring pliers are designed to squeeze internal snap rings (circlips) from 40mm to 100mm (1-9/16" to 4") ID. The heavy duty jaws taper down to 3/32" (2.3mm) diameter pins and are angled to work with the plier handles perpendicular to the shaft. These 1034L pliers have extra-long jaws and handles for long reach areas. Brushed chrome finish with orange PVC-coated handles.