iGAGING® Premium Dial Indicator, 0 - 1"/0.001", White Dial Face

The Starrett® Shaft Alignment Clamp is designed for fast, precise alignment of motors, pumps, compressors, etc. This system is capable of addressing radial and angular misalignment problems and can be set up within minutes. Features: Lightweight clamp design made of black anodized aluminum Rigid 3/8" diameter stainless steel indicator posts provided in three lengths (5", 7-7/16", and 9") Extension plate allows for added radial clearance Heavy-duty roller chain can accommodate up to a 7-1/2" diameter shaft Set comes with two Starrett® 196B5 Indicators Excess roller chain can be secured to ...

The Mahr MarTest 800 SL (4306200) features an extended 41.24mm stylus for accessing recessed features and confined spaces. Range of ±0.25mm with 0.01mm graduation. High-contrast dial face sealed with O-ring for liquid resistance. Mineral glass viewing panel protects against scratching and solvent damage. Matt chrome-plated casing with three dovetail guide rails. Shockproof mechanism with jeweled bearings and overload protection. Ideal for deep-bore and hard-to-reach measurements. Includes mounting shaft, test certificate, and case.

The Mahr MarCator (4126751) is a precision AGD Group 2 mechanical dial indicator built to ANSI/AGD dimensional and accuracy specifications. Unit construction with removable movement saves repair and cleaning time. Hardened gears and stainless steel racks provide lasting protection against shock and wear. Jeweled bearings minimize friction for longer service life. Skeletonized, hobbed gears deliver sensitive response with minimal hysteresis error. Soft-tinted dial (green for inch) minimizes eye strain. Balanced dial hand provides no-shift, precise reading. Controlled rack and pinion mesh ...

The Starrett® 196 Universal Back Plunger Dial Indicator features graduations to .001" and 0.02mm that handle by far the majority of jobs. Shank diameter is 1/4" (6.3mm). Antimagnetic models are also available - (inch reading) 196A6Z and 196B6. For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model. Then the contact should be brought against the work with enough pressure to give the hand one full turn. Set the hand at zero by rotating the dial with the knurled bezel. This provides one full rotation of the hand both to ...

Fowler® 52-585-155-0 X-Proof Water Resistant Indicator Set Magnetic Base: Fine adjustment Base dimensions: 2" x 2-11/32" x 1-13/16" Also mounts test indicators with 1/4" post 85 lb. pull On-Off lever release magnet V-base for placing on round surfaces X-Proof Indicator: Travel: 1" Reading: .001" Continuous reading: 0-100 Tolerance markers AGD Group 2, 2-1/4" dia. Lugback and carbide point Robust, shockproof design Rubber bellows on stem O-ring seal on safety cap O-ring protection for bezel and rotating dial Sealed back plate