Proto® Puller, Slide Hammer 2-1/2 lbs.

For removing small bearings, gears or discs, etc. for tight or difficult-to-access spaces. This handy, space-saving model is particularly suited for vehicle electrical equipment, electrical workshops, compressed air repair processes and other similar applications. The thin pulling hooks are suitable for narrow, difficult-to-access locations. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Thin pulling hooks. Automatic self-centering pulling hooks. Two-arm design for space-saving operation. Mechanical pressure screw. Milled thread ...

For removing bearings, gears, discs, etc. Spindle head band prevents the wrench from slipping off. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Standard pulling hook. Automatic self-centering pulling hooks. The three-arm design ensures that the load is distributed evenly and that the part to be removed is held securely. Optimal adjustment of the spindle to the shaft with 2-sided spindle tip (ball and tip). Mechanical pressure screw. Milled thread treated with special coating. The pulling hooks sliding parts must always sit ...

For extracting inner bearings, bearing outer rings and bushings. KUKKO internal extractors can be combined with counter supports and slide hammers. When combined with the internal extractors, extensions from series 21-V enable deeper bearings to be extracted. Spare parts are available for internal extractor sizes 21-89 and 21-90. The 2-shell design with extra large grasp edges ensures safe extraction. The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading. Mechanical pressure screw. Do not use any electrical or pneumatic servo ...

Their design is ideal for removing bearings, bushings, sprockets, grease retainers, seals, gears, and bearing covers. Their jaws can be positioned either "internally" or "externally", pulling with 2 or 3 jaws. Their adjusting cone applies constant pressure on all jaws. T-handle provides better control. Micro-alloy steel shaft, heat-treated and checked so the hammer slides smoothly and strongly. Sliding hammer extracts by blows delivered to the adjusting cone. Micro-alloy steel jaws are heat treated for greater resistance to traction. Adjusting cone applies constant pressure.

For splitting particularly large tight or over-twisted nuts without damaging the bolt thread of quality grades 5, 6, 8 and 10. Due to the hydraulics, only a little force is needed. Chisel available as a replacement part, time-saving order process thanks to numbering system. Very sharp cutting through facet cut. Hardened chisel cutting edge. Exceeding the torque specifications can lead to the tool being damaged. Do not use any electrical or pneumatic servo screwdrivers or hammer drills. The splitting chisels of the nut splitters are wearing parts. Blunt, pitted or broken chisels must be ...