Replacement Hose For Wall Mount Jet-Kleen™ Units - 56" - JK-WMH

Milton 603 3/8" MNPT 3/8" ID Hose End Fitting 3/8" MNPT brass hose ends have a 3/8" ID hose and barb. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. 3/8" Male national pipe thread For best results and professional finished product the hose end should be secured with a crimped ferrule 3/8" hose inside diameter

3/8" Air hose swivel connector offers a 360 degree swivel in two directions which allows air hose to be connected to air tool to reduce hose kinking and keeps the hose out of the way. These are not for use with percussion tools without the use of a hose whip or snubber hose. Allows for better flexibility and less hose kinking. Maximum inlet pressure of 150 pounds per square inch Controlled air flow up to 40 standard cubic feet per minute Built in gauge 1/4" Female national pipe thread

The perfect tool for cleaning inaccessible and hard-to-reach areas, powerful 80LJ Whisper Jet Series safety air guns are used for cleaning and blowing debris in noise sensitive environments. Whisper Jets nozzle reduces noise 6 to 20 dB compared to conventional air guns.

The Jet-Kleen™ blow-off system can be safely used on any person, surface, component or anywhere in the work environment where fibers, dust or other debris may need to be effectively removed. Because the Jet-Kleen does not use compressed airflow, it can be aimed directly at the whole body, including in direct contact with the skin, making them ideal for personnel cleaning stations. At only 3.0PSI it is well below OSHA standards but has the high volume of air and the performance employees are looking for. Package Includes: Jet-Kleen Blow Off System, Hose, Hose Clamp, Swivel Connector, ...

Milton 642 3/8" ID Hose Mender Fitting These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have hose barbs. 3/8" hose inside diameter For best results and professional finished product the hose end should be secured with a crimped ferrule Features a barb type construction that provides a secure grip on the hose ...