Kukko Single Edged Mechanic Nut Splitter, Class 6, 3/16"(4mm) To 3/8"(10mm)

For removing small bearings, gears or discs, etc. for tight or difficult-to-access spaces. This handy, space-saving model is particularly suited for vehicle electrical equipment, electrical workshops, compressed air repair processes and other similar applications. The thin pulling hooks are suitable for narrow, difficult-to-access locations. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Thin pulling hooks. Automatic self-centering pulling hooks. The three-arm design ensures that the load is distributed evenly and that the part ...

For removing ball bearings, roller bearings, inner races and other tight parts if there is not enough space to use pulling hooks. Easy to use, as the separator jaws are quickly and centrally tensioned with just one pressure spindle. Ultimate stability when removing, as the separator and pulling device are screwed firmly together. Almost all components available as replacement parts, time-saving order process thanks to numbering system. With quick-clamping pressure spindle. The sharp blades enable flush parts to be removed where pulling jaws cannot be used. The wedge-shaped separator jaws ...

For extracting inner bearings, bearing outer rings and bushings. KUKKO internal extractors can be combined with counter supports and slide hammers. When combined with the internal extractors, extensions from series 21-V enable deeper bearings to be extracted. Spare parts are available for internal extractor sizes 21-89 and 21-90. The 2-shell design with extra large grasp edges ensures safe extraction. The internal extractors are equipped with an internal safety stop to protect against excess spreading and overloading. Mechanical pressure screw. Do not use any electrical or pneumatic servo ...

For removing small bearings, gears or discs, etc. for tight or difficult-to-access spaces. This handy, space-saving model is particularly suited for vehicle electrical equipment, electrical workshops, compressed air repair processes and other similar applications. The thin pulling hooks are suitable for narrow, difficult-to-access locations. Almost all components available as replacement parts, time-saving order process thanks to numbering system. Thin pulling hooks. Automatic self-centering pulling hooks. The three-arm design ensures that the load is distributed evenly and that the part ...

Made in Germany, Reversible jaws can be used for both external and internal applications, Three jaw design ensures the load is distributed evenly. The 3-arm lug puller with oscillating and reversible puller legs is used for centric pulling off of bearings, gears and washers in all common sizes for handicraft, workshop and industry. It can be used to loosen any component that sits on a shaft and is freely accessible from the outside. The oscillating puller legs with adjustable clamping depth can be used on both sides. The claw shape differs depending on the version. The 3-arm design ...