Proto J6232 Torque Multiplier 3200 ft-lbs, 19-19/32" Long

Proto® 1" Drive Dial Electronic Torque Wrench 100-1000 ft-lbs Extended operation range in ft-lb and Nm units. Precision Accuracy: + / - 1% in BOTH directions. Accuracy valid from 10% to 100% of full scale. Large easy to read digits. Patented rotary bezel. LCD and key pad rotate both ways, up to 359 degrees for easy viewing. Torque target zone adjustable 1% to 10% indicates when the desired torque limit is approaching.- Yellow light indicates the low end of the zone- Green light and buzzer sounds when the target is reached- Red Light with intermittent buzzer indicates over-torqued One ...

Features: Provides the operator with nut-turning power that requires only a fraction of the force required when using conventional tools Input and output rotation is in the same direction Reaction bar rotation is opposite to input direction and must rest securely against a rigid object to withstand the generated reaction force By removing 4 screws, heads may be easily disassembled for inspection, cleaning and lubrication

Proto® 1 Drive Dial Torque Wrench 400-2000 ft-lbs, 56-280 mkg Accurate to ± 4% of torque reading in both directions at 20% to 100% of full scale. Industrial all steel or aluminum torque transfer components. High alloy torsion drive design accuracy not effected by hand position. Dual scale (English/Metric) with clockwise and counterclockwise operation fewer wrenches needed to complete job. Memory needles are standard on all wrenches except electric light models. Easy-to-read, high contrast scale. Laser marked serial number for traceability. N.I.S.T. (National Institute of Standards and ...

Proto® 1/2" Drive Ratcheting Head Micrometer Torque Wrench 50-250 ft-lbs, W/NIST Certificate Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. Calibration is accomplished by mechanical loading of each wrench in a horizontal position, and performing a three click test at 20%, 60% and 100% of maximum instrument capacity. Certification documents traceable to N.I.S.T. (National Institute of Standards and Technology). Manufactured to meet precision/highly accurate applications such as military and aerospace.

Proto® J6062C 1/4" Drive Ratcheting Head Micrometer Torque Wrench 40-200 In-Lbs Features: Head Width: 1-1/32" Head Depth: 3/4" Calibrated to +/- 3% clockwise direction (for J6060A, calibrated to +/- 4% clockwise direction) and +/- 6% counter clockwise direction at 20% to 100% of full scale. Calibration is accomplished by manually loading the torque wrench. Manufactured to meet standard industrial torque applications such as general industry, heavy equipment and maintenance.