Werner® Single Piece Roof Anchor, Stainless Steel

The Werner A410400 is a simple, portable, and personal Fall Arrest Anchorage Connector that fits 1-5/8-inch wide struts. The anchor is lightweight, simple to use, and quick to install. This anchorenables horizontal movement along the material of the strut channel.

The Werner A510011 5K Mega-Swivel Concrete Anchor is a robust anchorage bolt for use in concrete applications. The bolt requires a pre-drilled hole of 1/2-inch and 4.5 inches depth in 3000 psi concrete with minimum concrete thickness of 7 inches.

The Werner A311000 EVO Anchor is a 5K removable anchor that utilizes the Remote Grab System (RGS). The RGS allows the user to install the EVO Anchor before leaving the safety of the ground. The RGS can also be used to remove the anchor from the ground after the job is done. The EVO Anchor requires a pre-installed receptacle that is cast-in-place during construction of the surface.

The Werner A510022 10K Mega-Swivel with Straight Loop Insert Bolt attaches to the Werner A510021 Straight Loop Insert that was cast-in place during construction of the surface. The Mega-Swivel is made of steel and plated for corrosion resistance. Includes 5/8-inch bolt and lock washer. The Mega-Swivel design allows full range of motion.

The Werner A515000 Reusable Anchor with 2-inch swiveling forged teardrop D-ring is a lightweight, easy to use bolt providing convenient anchorage in concrete. The anchor requires a pre-drilled hole of 3/4-inch and 3-1/2-inch minimum depth in 3000 psi concrete. It can be used in any direction as a fall protection anchor and is reusable with its easy to insert and remove design. This features a blue trigger and hole plug for easier removal.