DeWalt® eng. by Powers 02367-PWR - Zip-It Jr. Anchor, #8 x 1 Screws, & #2 Phillips Driver Bit - Pkg Qty 10

Toggle Bolt Hollow Wall Anchor, Combo Round Head, 3/8" X 4" The Toggle Bolt is a spring wing type hollow Wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8" X 2" to 1/2" X 6" with combo round, flat, mushroom, tie-wire or slotted hex head styles.

Wall Grip Anchors, also known as Mollies or Molly Bolts, are made of carbon steel and manufactured and designed for use in hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to thin walls such as paneling and hollow doors. These are length specific anchors. They are installed using the provided machine screw or with a special puller.

Wall Grip Anchors, also known as Mollies or Molly Bolts, are made of carbon steel and manufactured and designed for use in hollow wall installations. When tightened, the body pulls up to enable the anchor to secure itself to thin walls such as paneling and hollow doors. These are length specific anchors. They are installed using the provided machine screw or with a special puller.

1/4X2 1/4 Phillips Flat Concrete Screw With Drill Bit Blue Perma Seal. Concrete screws cut their own threads when used in concrete, block or brick. Carbide bits are recommended for use in masonry. Flat head screws are used when protrusion of the fastener above the mating surface is unacceptable. Typically 100 degree flat or for fastening softer materials, 82 degrees flat.

Strap-Toggle™ Hollow Wall Anchor, 3/16" X 4", Drill Dia. 1/2" The Strap-Toggle is a pre-assembled anchor consisting of a carbon steel wing and a locking cap and ratchet leg assembly molded from engineered plastic. When compared to traditional Toggle Bolt, this unique anchor can be installed through a smaller hole and does not require a fixture or screw to set it.