Milton 1706-6 1/4" MNPT 3/8" ID Push On and Lock Swivel Fitting

Made of strong, flexible Nitrile with synthetic yarn reinforcement, Milton push on and lock on air hoses resist oil, abrasions and ozone effects. No clamps or ferrules needed, simply cut the hose to desired length and push on fitting. Ideal for automotive paint shops, construction, manufacturing and petrochemical industries, this push on and lock on hose is designed for use with compressed air, water and petroleum based solvents. Measuring at 500' total length, this push on and lock on air hose has a 3/8" ID x 5/8" OD and comes on a handy reel. Has a Maximum working pressure of 250 PSI ...

This high pressure coupler is designed for use with Milton high pressure tire valve adapter, #1007. Primarily used in the fluid power industry, this slip sleeve style constant bleed JIC fitting has a 1/2" x 20 connection. Slip sleeve constant bleed detachable fitting For use with Milton high pressure tire valve adapter Joint Industry Council fitting 1/2" x 20 connection Primarily used in the fluid power industry

Milton C1072G 1/4" MNPT Commercial Slip Sleeve This 1/4" MNPT slip sleeve constant bleed detachable fitting is a replacement part for Milton high pressure gaging element #1066 or Milton remote controller assembly #1068. 1/4" male national pipe thread Replacement part Slip sleeve easily attaches to M style plug end on high pressure gaging element

Milton 642 3/8" ID Hose Mender Fitting These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have hose barbs. 3/8" hose inside diameter For best results and professional finished product the hose end should be secured with a crimped ferrule Features a barb type construction that provides a secure grip on the hose ...

This 302-32 x 1/4" MNPT commercial stainless steel adapter will replace old or worn fittings on Milton high pressure inflator gauges. 302-32 x 1/4" male national pipe thread Replacement part Features a 9/16" hex located in the middle of the fitting for tightening and loosening of fitting