Milton C1065-9 Commercial Inlet Fitting

This high pressure coupler is designed for use with Milton high pressure tire valve adapter, #1007. Primarily used in the fluid power industry, this slip sleeve style constant bleed JIC fitting has a 1/2" x 20 connection. Slip sleeve constant bleed detachable fitting For use with Milton high pressure tire valve adapter Joint Industry Council fitting 1/2" x 20 connection Primarily used in the fluid power industry

Milton 600 1/4" MNPT 1/4" ID Hose End Fitting 1/4" MNPT Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. 1/4" hose inside diameter 1/4" Male national pipe thread Features a barb type construction that provides a secure grip on the hose inside diameter

Milton 642 3/8" ID Hose Mender Fitting These brass hose menders are made for a 3/8" ID hose. Brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have hose barbs. 3/8" hose inside diameter For best results and professional finished product the hose end should be secured with a crimped ferrule Features a barb type construction that provides a secure grip on the hose ...

Milton 605-2 1/4" FNPT 3/8" ID Hose End Fitting 1/4" FNPT solid brass hose ends are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Fits hoses with 3/8" hose ID. 1/4" female national pipe threads 3/8" hose inside diameter Solid, non-swivel

Milton 640 1/4" ID Hose Mender Fitting 1/4" ID hose mender brass hose fittings are used to assemble new hoses or replace old fittings on hoses. A hose clamp may also be used but is not as desirable. For best results and professional finished product the hose end should be secured with a crimped ferrule. Both ends of these hose menders have 1/4" hose ID and hose barbs. Assemble new hoses or replace old fittings 1/4" hose inside diameter Features a barb type construction that provides a secure grip on the hose inside diameter