Werner® A320003 Mega-Swivel Anchor Steel

The Werner A270000 Wood Truss Anchor fastens easily to the underside of a roof truss providing a quick and easy fall protection solution in areas where an adequate anchorage point is often difficult to locate.

The Werner A410400 is a simple, portable, and personal Fall Arrest Anchorage Connector that fits 1-5/8-inch wide struts. The anchor is lightweight, simple to use, and quick to install. This anchorenables horizontal movement along the material of the strut channel.

The Werner A510011 5K Mega-Swivel Concrete Anchor is a robust anchorage bolt for use in concrete applications. The bolt requires a pre-drilled hole of 1/2-inch and 4.5 inches depth in 3000 psi concrete with minimum concrete thickness of 7 inches.

The Werner A311000 EVO Anchor is a 5K removable anchor that utilizes the Remote Grab System (RGS). The RGS allows the user to install the EVO Anchor before leaving the safety of the ground. The RGS can also be used to remove the anchor from the ground after the job is done. The EVO Anchor requires a pre-installed receptacle that is cast-in-place during construction of the surface.

The steel floor bracket is zinc-plated and attaches directly to a T-slot profile with the suggested hardware (which can be found on the "Suggested Hardware" Tab). Use wedge anchors to mount the bracket directly to a concrete floor. The design of the steel floor bracket is compact, making it perfect in tight or smaller locations.