Filter Elements - 1/2" (NPT) - For Use with Motorguard M30 and M60

The Metal Man FC130i is a 120V powered Inverter Flux Core Wire Welder that is economical and easy to use. Flux Core wire is used for welding steel materials only and requires no shielding gas. This is ideal for outdoor applications where portability is key. The leading edge Inverter Technology provides crisp, consistent and powerful welding performance out of this light weight easy to carry unit.. Inverter technology creates less heat loss resulting in a higher 30% duty cycle. The FC130i has dial adjustable wire feed speed and voltage controls and can weld steel from 18 gauge to 3/16" ...

Features: 40 amp plasma cutter capable of cutting 1/2" steel on 220v and 1/4" steel on 110v Allows for 110v 220v Operation with the switch of the power plug Cut all metals including aluminum much cleaner than the oxy-fuel torch Digital display and air adjustment on the front for fine tuning. Cost of operation is low with low price consumables. Uses compressed air from an air compressor. Don't forget to get extra tips.

Victor® compatible, 450-series cutting, welding & heating outfit cuts up to 19.05mm (3/4 in) and welds 12.7mm (1/2 in) right out of the box. Cuts up to 200mm (7.87") with proper tips. Cuts up to 19.05mm (3/4") and welds 12.7mm (1/2") right out of the box. 450-series regulators. Ideal for heavy duty fusion welding, braze welding, brazing, heating and hand cutting operations in industrial and general maintenance, fabrication, automotive repair and HVAC. For use in fabrication operations, in the work shop, on the farm or ranch, at the job site or in the home shop. 315-series torch handle. ...

The Metal Man MP140T is a portable DC inverter wire feed welder capable of welding with solid wire (with shielding gas) or with flux core wire. It comes ready to accept part number EZFSG2 optional Spool Gun for welding aluminum. This machine also has smooth DC stick capabilities and the ability to perform lift start DC TIG welding on steel and stainless steel materials with part number ACTT1, the optional TIG Torch. The Metal Man MP140T is capable of MIG welding 3/16"steel in a single pass. It uses leading edge Inverter Technology to provide high quality welds that are crisp, clean, and ...

Longevity® ForceCut 60i™ 60 Amp Continuous Pilot Arc Plasma Cutter ForceCut Series 60AMP IGBT Plasma Cutter for cutting up to 1 1/4" thick steel. 220v Single Phase Operation. Compares to and surpasses leading brands. This Plasma Cutter weighs in at only 45lbs! This plasma cutter can cut any kind of metal including aluminum, stainless steel or even copper! This is the most capable IGBT Pilot ARC Plasma Cutter on the market for its retail price! This plasma cutter runs off Inverter technology which has completely taken over the market for portability and power! This plasma cutter will ...