General Wire 8-1/2' x 1-1/4" Profle x Cable with "L" Connectors

The General Wire L-CW is a coupling wrench for General Wire "L-Connector" sectional sewer cleaning cables. Like the G-CW, it is used to disconnect and reconnect cable sections and cutters during drain cleaning operations.

This machine is almost as easy to run as a lawn mower. You push eight foot (available separately) or ten foot (included with this package) cable sections into the line until you reach some resistance. Then attach the rear cable coupling to the machine, stand behind it, and turn it on. Watch the cable feed itself into the line. When a section has run into the drain, attach another one and keep going. This self-feeding feature also works to pull sections out of the line. The Model 88 handles jobs up to 200 ft. long in lines from 3" to 10" diameter. A standard 3/4 hp capacitor motor supplies ...

The General Wire G-SHD is a Spear Head Starting Drill with a G-Connector for General Pipe Cleaners sectional cable systems. It is used to pierce a blockage and establish initial water flow before switching to larger cutters for complete cleaning.

Wire Rope Center Construction. Heavy-gauge wire coiled tightly around 49-strand aircraft-type wire rope and heat treated. Has unequalled strength and the right amount of flexibility. So tough it carries a one-Year Limited Warranty against defect or breakage. Flexicore Patent Nos. 2,244,735 and 2,849,870

2" U Cutter for cutting and scraping. Used for cutting and scraping grease, sludge, roots, and other obstructions from drain and sewer pipe walls. Commonly used as a general-purpose cleaning cutter after a spear head has opened the blockage.